ISO STANDARD END SUCTION PUMP FITTED WITH OIL LUBRICATED BEARINGS

Pump Lubrication
1. PUMPS FITTED WITH OIL LUBRICATED BEARINGS

1.1 Oil Specification

HOUSING
 MODULE
OIL LUBE OIL SPECIFICATION
QTY(ml) Preferred oJSs are those that have non foaming properties.
Typicatfy, twbsne of hyctfauiic osts wotitct be stiitable.
Viscosity of SAE20 to SAE30 (ISO VG 46 to 100).
Automotive os!s wotitct be stiitabie in light dufy cycles.
1 450 Light Duty – Less than 8 hours/day or intermittent
Tellus 46 or 68, or Turbo T46 or T68.
2 800 Heavy Duty – Greater than 8 hours/day or continuous
Tellus 68, Turbo T68 or Madrella AS68.
3 1200 Low Temperature – Less than 10 to -30 degrees Celsius
Refrigerator Oil 68K.

 

 

Bearing housing temperature should not exceed 80 degrees Celsius in normal circumstances.
Where
higher temperatures are noted, use an oil of lower viscosity.
When pumping product of elevated temperature, it may be advisable to have oil cooling fitted to
maintain an acceptable bearing housing temperature.

Consult dealer for maximum operating speeds
1.2 Change interval

 

TYPE OF SERVICE  HOURS OF SERVICE
LIGHT DUTY  Change oil after 2000 hours service
HIGH TEMPERATURE Change oil after 1000 hours service
HEAVY DUTY  Change oil after 1000 hours service

 

 

 


Post time: Jun-19-2019

WhatsApp Online Chat !